– Convert VMware Virtual Machine to Hyper-V : A complete guide

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Specify the source details for connection to a vCenter server or ESXi server. Now, select the virtual machine for conversion from the ESXi server you have chosen. After selecting the VM, click Next. Virtual machine connection. If VMware Tools are installed on a Linux virtual machine, you must provide the username and password of the root account on the source VM to enable the converter to uninstall VMware Tools.

In this example, a Windows machine without VMware Tools is used — hence, these fields are inactive. Define the final state of the source machine and the final state of the destination machine On or Off. Define the workspace. The workspace is a temporary folder that is used to store temporary files during the conversion process.

For better performance, this folder should be located on the machine where the converter is installed. Enter the path or click the Browse button and select the appropriate folder.

Then click Next. Check the summary. Review the configuration details you have specified. If the warnings are not critical, you can proceed; these do not prevent conversion. Click Finish to start the virtual machine conversion process. Wait for the VM conversion to complete. The process can be time-consuming, depending on the size of the virtual disks of the source VM as well as network speed.

If conversion is successful, click Close to exit the virtual machine converter. You can now edit the VM settings. Right-click the VM and select Settings from the context menu. The VM is stored in the directory you specified earlier. Remove the network adapter and add a legacy network adapter for older guest operating systems to enable networking. Then select the appropriate virtual switch or create a new one for VM connection to the network.

Wait until the OS recognizes new virtual devices. For manual installation of Integration Services, insert the vmguest. Add the converter module to the current PowerShell session. The module is located in the directory where Microsoft Virtual Machine Converter is installed.

In the current example, the default location is used for the converter. Type the following command in PowerShell:. Go to the directory of your VM and list the files of that directory.

You can see the VM files here. Make a note of the name of the VMDK file, as it is needed for further operations. In the current example, a Linux virtual machine with one virtual disk is used.

For this part, refer to the blog post that explains how to create a new virtual machine in Hyper-V. The key point is to connect the virtual disk.

At the appropriate stage of the New Virtual Machine Wizard, select Use an existing virtual hard disk and specify the location of your newly created VHD file. You can also use this method for converting VMs with multiple virtual disks.

Each virtual disk must be attached to the VM after conversion in this case. In this case, one VMware virtual disk consists of two files — diskname.

A vmdk file is a descriptor that contains information about the virtual disk configuration and points to a -flat. The virtual disk data itself is stored in the -flat. The size of a vmdk file is a few kilobytes, while the size of -flat.

Log into your vCenter with the vSphere client enter the IP address of your vCenter Server in the address bar of your web browser. Go to the Storage tab, select the datastore with the files of your VM, select the VM directory, and select the virtual disk that should be converted. Click Next to continue. Then click Next. Click Next. Provide a Name and select a location for the virtual machine. You can select a local folder or a network share, with User name and Password to be used when connecting to the network share of the destination virtual machine.

On Options page, browse the Current settings and optionally Edit the parameters for the conversion task. Then you can click Next to continue. On Summary page, review the information and click Finish to start conversion.

You can see the progress in Recent Tasks interface. And there is still no official replacement since it is announced unavailable for download. If you are finding an effective alternative, it is recommended currently that you can try a file-based backup way to backup everything on the Hyper-V VM and restore it to VMware, just like backup and restore on the physical machines.

And if you may need to convert VMware to Hyper-V back in the future. In the next part I will introduce two ways to do it. If you have not, you may need to download it on other site or refer to the second method. Before you begin, please power off the target VM and uninstall the VMware tools. Select the Machine Type as Virtual machine conversion , and click Next to continue. Check Use my Windows user account option, or provide other User name and password.

Choose the type of virtual hard disk to use for the converted disk as Fixed size or Dynamically expanding. If the original VM is powered on, have supported versions of Linux installed, and are running the VMware tools, you will need to provide information to connect to the VM, for enabling the VMware tools to be uninstalled.

On Workspace page, click Browse… to specify a folder for storing temporary files in the conversion process. And click Next. On Summary page, review all the configuration information you specified, and then you can click Finish to start conversion. You can see the progress on Completion page.

Generally it will result in 3 files, the manifest file ends with. Spelling error report The following text will be sent to our editors:.

Your comment optional :. Send Cancel. Community Edition. Hard Disk Manager for Business.

 
 

How to Convert Hyper-V VM to VMware or VMware to Hyper-V.

 

For this article, we will discuss three conversions examples that we will divide into three parts:. However, after many customers complain about this decision, Microsoft decided to continue to deliver the tool-free as a stand-alone tool but supporting only while using and included in the Microsoft System Center. As the name says, is a document with the commands on how to perform all conversion tasks using Powershell commands without the need to use the conversion GUI tool.

These are the requirement to install this tool and supported Operations Systems:. The installation of MVMC is very straightforward. Install the stand-alone MVMC in a workstation or server that has access to both source and destination. Important: Keep in mind that the location of MVMC should have enough disk space for temporary files from the conversion.

Preventing network stress during conversion, the use of local disk is recommended to store conversion temp files. Note: It is recommended not to install the tool in the source or at the destination. So if possible, always use a different location to install MVMC. Before starting the process some considerations to bypass some issues that may block the conversion. If Hyper-V hosts have Windows firewall enabled, check if firewall rules particularly in Hyper-V destination are set to allow the converter to migrate the VM into the Hyper-V.

So uninstall VMware Tools before the conversion. This task can be done with PowerShell. Even MVMC 3. However, be aware that Microsoft while using this tool does not support this. Mainly if converting critical servers from your environment. Full information about this tool and supported systems can be found HERE. Note: If you are converting with the source Virtual Machine power on, do not forget to disable the power on after conversion option.

In PowerShell, enter:. Using the vSphere client, log into your vCenter and go to the Storage tab. Here, select the datastore, virtual machine directory, and virtual disk to convert. Then click “Download” and save the zip archive with the. There are actually two files in the datastore.

Within a few minutes, the application checks the current state of VMFS datastores, disks, and volumes. Next, all possible files are restored, and the subsequent integrity check of the recovered data is completely free for customers. Then a decision is made to purchase a data export license. In this example, the Hyper-V server is running on a local host the converter and the Hyper-V server are installed on the same machine. Make sure that your firewalls are configured accordingly if your converter and Hyper-V host are running on different machines.

Remote access through Windows Management Instrumentation must be enabled. Select the name or IP address of your destination host, select the credentials of a user who has sufficient access privilege to connect to a Hyper-V host the local administrator of the destination Hyper-V host and the domain administrator have such access privilege.

Then click Next to proceed. Set the disk options. Specify a network path to store the converted virtual hard disks. For the purpose of this walkthrough, the VM is being converted and transferred to a Hyper-V server installed on the same machine that is running the converter.

Thus, the following network path is applied:. It is recommended to avoid using the system disk usually C: for storing VMs in production environments. Choose the type of virtual disk to be used after conversion. The virtual disk can be of two types: a fixed size disk the analog of a thick-provisioned disk or a dynamically expanding disk the analog of a thin-provisioned disk. In this walkthrough, a dynamically expanding disk is chosen for the purpose of saving storage space.

Choose the format of the virtual hard disk:. Click Next to continue. Specify the source details for connection to a vCenter server or ESXi server. Now, select the virtual machine for conversion from the ESXi server you have chosen.

After selecting the VM, click Next. Virtual machine connection. If VMware Tools are installed on a Linux virtual machine, you must provide the username and password of the root account on the source VM to enable the converter to uninstall VMware Tools. In this example, a Windows machine without VMware Tools is used — hence, these fields are inactive.

Define the final state of the source machine and the final state of the destination machine On or Off. Define the workspace. The workspace is a temporary folder that is used to store temporary files during the conversion process. For better performance, this folder should be located on the machine where the converter is installed. Enter the path or click the Browse button and select the appropriate folder.

Then click Next. Check the summary. Review the configuration details you have specified. If the warnings are not critical, you can proceed; these do not prevent conversion.

Click Finish to start the virtual machine conversion process. Wait for the VM conversion to complete. The process can be time-consuming, depending on the size of the virtual disks of the source VM as well as network speed. If conversion is successful, click Close to exit the virtual machine converter. You can now edit the VM settings. Right-click the VM and select Settings from the context menu.

The VM is stored in the directory you specified earlier. Remove the network adapter and add a legacy network adapter for older guest operating systems to enable networking.

Then select the appropriate virtual switch or create a new one for VM connection to the network. Wait until the OS recognizes new virtual devices. For manual installation of Integration Services, insert the vmguest. Add the converter module to the current PowerShell session. The module is located in the directory where Microsoft Virtual Machine Converter is installed. In the current example, the default location is used for the converter. Type the following command in PowerShell:.

 

Migrate vmware workstation to hyper-v windows 10 free download

 
Learn how to convert VMware VMs to Hyper-V. Download NAKIVO Backup & Replication to export backups and recover VMs across platforms. The free tool MVMC can be downloaded from the Microsoft site HERE. With the converter tool download, you can also download the document. How to Convert Vmware VM to HYPER-V WITH MVMC · Download the Microsoft Virtual Machine Converter from here · Start the installation and follow the.